Conceptual and Mechanical Design of an Equivalently Effective Hand- Arm Surrogate Model for Rotary Hammers

Forschungsthema/Bereich

Design, Power-Tools

Typ der Abschlussarbeit

Bachelor

Startzeitpunkt

-

Bewerbungsschluss

31.12.2026

Dauer der Arbeit

3 month

Beschreibung

The dynamic behaviour of a rotary hammer during operation is influenced not only by the substitute, but also by its mechanical coupling with the operator. Grip and feed forces, as well as the inertia of the human arm, can affect the motion of the rotary hammer.
A hydraulic substitute base is being developed at the Institute Mobile Machines for repeatable testing of rotary hammers. It reproduces mineral substrates in an equivalently effective manner. To test the rotary hammer on the test rig under realistic conditions, a mechanical hand-arm surrogate model will represent the coupling between the rotary hammer and the operator.
The aim of this Bachelor's thesis is the conceptual and mechanical design of such a hand-arm surrogate model. The operator's hands and arms at the two handles of the rotary hammer will be represented by suitable spring-damper systems. Existing hand-arm models and suitable parameters from the literature will first be investigated. On this basis, spring stiffnesses and damping coefficients will be specified so that the model is equivalently effective to the human hand-arm system. A mechanical solution will then be developed. The result will be a buildable design including suitable components, dimensioning, a CAD model and technical documentation. This will provide the basis for subsequent assembly and experimental testing.

The following work steps are planned:
• Literature review of existing hand-arm models
• Analysis of the dynamic coupling between operator and rotary hammer
• Definition of suitable target quantities for assessing equivalent effectiveness
• Selection or development of a spring-damper model for both handles
• Determination of suitable spring stiffnesses, damping coefficients and, if required, equivalent masses
• Evaluation of model behaviour using analytical or simulation-based investigations
• Definition of test-rig requirements
• Development and assessment of suitable design concepts
• Sizing and selection of the required components
• Creation of a CAD model and the required manufacturing and assembly documentation
• Assessment of the design with regard to repeatability and technical feasibility
• Documentation and presentation of results

https://www.fast.kit.edu/download/DownloadsMobima/ausschreibung-bachelorarbeit-hand_arm_modell_en.pdf

Voraussetzung

Voraussetzungen an Studierende

• high motivation

Studiengangsbereiche

• Ingenieurwissenschaften
  Maschinenbau
  Materialwissenschaft & Werkstofftechnik
  Mechatronik & Informationstechnik
  Mechanical Engineering
  Mechatronics and Information Technology
• Wirtschafts- und Rechtswissenschaften
  Wirtschaftsingenieurwesen

Betreuung

Titel, Vorname, Name

Johannes Klotz

Organisationseinheit

FAST-Mobima

E-Mail Adresse

johannes.klotz@kit.edu

Link zur eigenen Homepage/Personenseite

Website

Bewerbung per E-Mail

Bewerbungsunterlagen

• Anschreiben
• Lebenslauf
• Notenauszug

E-Mail Adresse für die Bewerbung
Senden Sie die oben genannten Bewerbungsunterlagen bitte per Mail an johannes.klotz@kit.edu


Zurück